LineageOS

The Unofficial Blog

{UPDATED}[Unofficial] Download Lineage OS 15.1 ROM Android Oreo 8.1 for Lenovo ZUK Z2(Plus) [2018]

by Leave a Comment

LINEAGEOS 15.1 ROM FOR Lenovo ZUK Z2 (Plus) ANDROID OREO 8.1 

Today we will give you a guide on Lenovo ZUK Z2(Plus). Official Lineage OS 15.1 ROM is based on the Android Open Source Project with extra contributions from many people within the Android community. You can install the Custom ROM without needing Google Application Installed. Official LineageOS 15.1 ROM does still include various hardware-specific code, which is also slowly being open-sourced anyway. In the previous tutorial, we have already explained how you can install Lineage 14 Lenovo ZUK Z2 Device.

download-lineage-os-15-1-rom-android-oreo-8-1-for-lenovo-zuk-z2plus-2018
download-lineage-os-15-1-rom-android-oreo-8-1-for-Lenovo-Zuk-z2plus-2018

 

First Check Lenovo ZUK Z2 Specification. 

The Smartphone carried out with an AMOLED of 5.0-inch touchscreen display with a resolution of 1080 pixels by 1920 pixels. However, it has a PPI of ~441 pixels density per inch.

The Lenovo ZUK Z2 comes along with Quad-core 2.15 GHz which packs up with Qualcomm MSM8996 Snapdragon 820 chipset. However, you can upgrade via a microSD card slot up to 256GB. The Smartphone carries out with 3GB of RAM with 32GB of internal memory in the standard edition. Premium version packs up with 4GB of RAM with 64GB internal memory. Lenovo ZUK Z2 packs up with 13–Megapixel primary camera on the rear and an 8-megapixel of front shooter for selfies.

The Lenovo ZUK Z2 runs on Android 7.0(Nougat). The device comes with a 3500mAh power non-removable battery. The Smartphone covers 141.7 x 68.9 x 8.5 mm dimensions (height x width x thickness) and weight 149.00 grams.
The Lenovo ZUK Z2 is Hybrid-dual SIM (GSM) smartphone that accepts a Nano-SIM. Wi-Fi, GPS, OTG, Bluetooth, 3G and LTE Networks these all are a lot of Connectivity options. The Lenovo ZUK Z2 sensors include Compass, Proximity sensor, Accelerometer, Gyrometer. The Smartphones carries with non-breakable Corning Gorilla Glass 4. So, here is the full guide to installing Lineage OS Lenovo ZUK Z2 Oreo version in your device. The Fingerprint sensors are available on the front and work in a flash.
DISCLAIMER: THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. YOU MUST FIRST BACKUP YOUR FULL DATA BEFORE FLASHING YOUR ANDROID DEVICE. TRY AT YOUR OWN RISK. THEREFORE, I AM NOT RESPONSIBLE IF YOUR DEVICE GET DAMAGED OR BRICK. 
Installing a custom ROM on a Lenovo ZUK Z2(Plus) requires the bootloader to be unlocked on the Lenovo ZUK Z2(Plus) phone, which may VOID your warranty. However, it may delete all your data also. Before proceeding further, you may consider backup all data on the phone. So, check out the full guide for LineageOS 15 Plus (codename for Lenovo ZUK Z2). You are the only person doing changes to your phone. Hence, we cannot be held responsible for the mistakes done by you.
Official Lineage OS 15.1 ROM Status for Lenovo ZUK Z2(Plus) Android 8.0 Custom ROM:

So, here is the status for the Lineage OS 15 Plus you guys can check what is working…

WHAT’S WORKING:

– Wifi
– Calls and Data
– Bluetooth
– Camera
– Video Playback
– Audio
– Sensors
– Flash
– GPS
– LED
– Fingerprint
– Camcorder Video Player
– LTE
KNOWN PROBLEMS:
– OTG!
– Offline Charging!
– SELinux Permissive!
– Tell us if you Know!

Before Starting

Before getting started, you must take care of the following task. Thus, it will help you flash your device without any interruption.
Step 1: Install USB drivers for your device on your PC.
Step 2: Be sure to back up your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.
Step 3: Make sure that your device must well charge. Ideally, the battery level should be around 60-80%. The more, the better.
Step 4: USB Debugging should enable on your device.
Important: Most of the custom ROM will not have Google APPS in them. So, you will have to download and install GAPPS manually. Also, you must take the backup of nandroid before installing custom ROM. Done with preliminary precautionary steps? So, here’s the guide:
So, here’s the guide:
TWRP Recovery allows you to do plenty of cool stuff. But the point of having any custom recovery is to be capable of flashing unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.
So, now let’s see how to flash a LineageOS ROM on Lenovo ZUK Z2(Plus) using TWRP recovery.

How to Install an official LineageOS on Lenovo ZUK Z2(Plus) Android Oreo 8.1

1. Download and transfer the official LineageOS ROM and GAPPS for Lineage os you wish to flash to your device’s storage.
2. Now boot your Android device into TWRP recovery.

3. Select “Wipe” from the TWRP main menu and do a “Swipe to Factory Reset” on the bottom of the screen.└ Note: This will factory resets your device. Skip the step if your ROM does not need a factory reset.

4. Now, go back to TWRP main menu, tap on “Install” and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.

  • After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of the screen to begin the custom ROM installation process. This may take some time.
  • So, finally, when your ROM successfully flashed, you’ll see “Wipe cache/dalvik” option. Thus, select it and then do “Swipe to wipe” on the bottom of the screen.
  • Hit the “Back” button once cache & dalvik wipe completes. Also, hit the “Back” button on-screen and then select “Reboot System” button.

Download – OFFICIAL LINEAGE OS 15.1 ROM for Lenovo ZUK Z2(Plus)

You can share some more relaxed and exciting methods to install Lineage OS 15 ZUK Z2 Plus. Do let us know in the comment section if you have some. Also, we have some new stuff related to MIUI 9 feedbacks have a look right here. 

Feedback from our Team & Users 
So, many of you guys are waiting for the Official Lineage OS for Lenovo ZUK Z2 as we are continually searching for “Plus” (basically a codename for Lenovo ZUK Z2). So, after hearing from the users, the first official build is, however, as good as the MIUI 8.2 developer. The users also confirm that MIUI 8.2 almost has no lag or boot loops as we are happy to tell you that now you can download and install MIUI 9 on your devices.

Feedback from our team is that some of us are not happy with the performance of the smartphone as well as the main cameras. Since users are quite satisfied with the performance of Lineage OS. Also, our team expects that LineageOS soon give an update of LineageOS 15.1 Oreo 8.1 for Lenovo ZUK Z2. Some users tweeted us that Volte is not working and some issues are coming with Network setting. Now, the Volte is working properly and is fixed after the update of Lineage os Zuk z2 oreo version. However, after getting the Lineage OS ZUK Z2 official ROM to update the fingerprint problem is also fixed.      

So, what’s your decision of installing LineageOS ROM? Did you guys have used the LineageOS ROM if yes than do comment in the comment box for any Assistance? If you guys think that you have some more ROMS for Lenovo ZUK Z2 than do share with us. If you have some cool things to share it with us, then let us know? Feedbacks of users is very much valuable before installing any ROM. So, these are Feedback from team and hope you guys enjoyed and excited to install LineageOS ROM.

{UPDATED}{Unofficial} Download Lineage OS 15 Android Oreo 8.0 for Lenovo ZUK Z1 (HAM) [2018]

by Leave a Comment

LineageOS 15.0 ROM for Lenovo ZUK Z1 (Ham) Android Oreo 8.0

Today we will give you guide on Android Oreo 8.0 for ZUK Z1. Official LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. You can install the Custom ROM without having need of Google Application Installed. Official LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

First Check ZUK Z1 Specification.  
The smartphone comes with a IPS LCD of 5.5-inch touchscreen display with a resolution of 1080 pixel by 1920 pixels. However, it has a PPI of 401 pixels density per inch.

 The ZUK Z1 comes along with 2.5GHz quad-core Qualcomm Snapdragon 801 processor and with 3GB of RAM. The Smartphone packs up with 64GB of internal storage. However, you can upgrade up to 2000GB via a microSD card. ZUK Z1 packs a 13-Megapixel primary camera on the rear and an 8-megapixel front shooter for selfies.
The ZUK Z1 runs on Android 6 and comes with  4100mAh power non-removable battery. The Smartphone covers 155.7 x 77.3 x 8.9 mm dimensions (height x width x thickness) and weight 170.00 grams.
The ZUK Z1 is a dual SIM (GSM) smartphone that accepts a Nano-SIM. Wi-Fi, GPS, Bluetooth, NFC, USB OTG, 3G and 4G (LTE networks) these all are a lot of Connectivity options. The ZUK Z1 sensors include Compass Fingerprint, Proximity sensor, Accelerometer, Ambient light sensor and Gyroscope.


DISCLAIMER: THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. YOU MUST FIRST BACKUP YOUR FULL DATA BEFORE FLASHING YOUR ANDROID DEVICE. TRY AT YOUR OWN RISK. THEREFORE, I AM NOT RESPONSIBLE IF YOUR DEVICE GET DAMAGED OR BRICK. 

 Installing a custom ROM on a ZUK Z1 requires the bootloader to be unlocked on the ZUK Z1 phone, which may VOID your warranty. However, it may delete all your data also. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone. Hence, we cannot be held responsible for the mistakes done by you.

 Official Lineage OS 15.0 ROM Status for ZUK Z1 Android Oreo 8.0 Custom ROM:
WHAT’S WORKING: 
– Working 
Bugs:
* Fingerprint Reader (U-Touch works tho)

* Video Recording is bugging but half broken video is working

Before Starting
Before getting started you must take care of the following task. Thus, it will help you flash your device without any interruption.

 Step 1: Install USB drivers for your device on your PC.

 Step 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.

 Step 3: Make sure that your device must well charge. Ideally, the battery level should be around 60-80%. The more the better.

 Step 4: USB Debugging should enable on your device.

Important: Most of the custom ROM will not have Google APPS in them. So, you will have to download and install GAPPS manually. Also, you must take the backup of nandroid before installing custom ROM. Done with preliminary precautionary steps? So, here’s the guide:

Warning:
Don’t flash any other Bootstack since the newest N Bootstack is already available in the ROM. This ROM may not work on devices that have not installed the N Bootloader and Modem.   

So, here’s the guide:
TWRP Recovery allows you to do a plenty of cool stuff. But the point of having any custom recovery is to be capable of flashing unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.


 Let’s see how to flash a Lineage OS 15.0 ROM Android Oreo 8.0 on ZUK Z1 using TWRP recovery.

 How to Install an official LineageOS 15.0 on ZUK Z1 Android 8.0 Oreo

    1. Download and transfer the official LineageOS ROM and GAPPS for Lineage os you wish to flash to your device’s storage.
    2. Now boot your Android device into TWRP recovery.
    3. Select “Wipe” from the TWRP main menu and do a “Swipe to Factory Reset” on the bottom of the screen.
      └ Note: This will factory resets your device. Simply Skip the step if your ROM does not need a factory reset.
    4.  Now, go back to TWRP main menu, tap on “Install” and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.
  • After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of the screen to begin the custom ROM installation process. This may take some time.
  •  So, finally, when your ROM successfully flashed, you’ll see “Wipe cache/dalvik” option. Thus, select it and then do “Swipe to wipe” on the bottom of the screen.
  • Hit the “Back” button once cache & dalvik wipe completes. Also, hit the “Back” button on-screen and then select “Reboot System” button.


Feedback from our Team & Users 

So, many of you guys are waiting for the Official Lineage OS for Lenovo ZUK Z1. As, we are looking for constantly searching for “HAM” (basically a codename for Lenovo ZUK Z1). So, after hearing from the users the first official build is however, as good as the MIUI 8.2 developer. The users also confirms that MIUI 8.2 almost has no lag or boot loops. As, we are happy to tell you that now you can download and install MIUI 9 on your devices. 

Feedback from our team is that some of us are not happy with the images clicked with Lenovo ZUK Z1 main camera. Since, users are quite happy with performance of Lineage OS 14.1.1. Also, our team expect that LineageOS soon give update of LineageOS 15.1 Oreo 8.1 for Lenovo ZUK Z1. Some users tweeted us that Volte is working and some issues are coming with Network setting is being fixed. Now talking about the Fingerprint sensors the Fingerprint reader is not working properly in ZUK Z1.

So, what’s your decision of installing LineageOS ROM? Did you guys have used the 
LineageOS ROM if yes than do comment in the comment section about your experience. If you have some more cooler things to share it with us then let us know? Feedbacks of users is very much important before installing any ROM. So, these are Feedback from team and hope you guys enjoyed and excited to install LineageOS ROM.

See also: MIUI 9 Global ROM: List of Compatible Devices

{ASOP} Download Lineage OS for Android Oreo 8.0 Oneplus One (OneplusOne) [ROM]

by Leave a Comment

LineageOS 15.0 ROM for OnePlus One (OnePlus One) Android Oreo 8.0


Today we will give you guide on Oneplus One (Oneplus One). Official Lineage OS 15.0 ROM is based on the Android Open Source Project with extra contributions from many people within the Android community. You can install the Custom ROM without having need of Google Application Installed. Official Lineage OS for Android Oreo 8.0 does still include various hardware-specific code, which is also slowly being open-sourced anyway. 

First Check OnePlus One Specification. 

The Smartphone carried out with an AMOLED of 5.5-inch touchscreen display with a resolution of 1080 pixels by 1920 pixels. However, it has a PPI of ~401 pixels density per inch.
The OnePlus One comes along with 2.5GHz quad-core Qualcomm MSM8974AC Snapdragon 801 processor and with 3GB of RAM with 16GB internal memory. Also, the prime version packs 3GB of RAM with 64GB internal memory. However, you cannot upgrade via a microSD card slot. OnePlus One packs a 13–Megapixel primary camera on the rear and a 5-megapixel front shooter for selfies.
The OnePlus One runs on Android 6.0.1(Marshmallow). The device comes with 3100mAh power removable battery. The Smartphone covers 152.9 x 75.9 x 8.9 mm dimensions (height x width x thickness) and weight 162.00 grams.
The OnePlus One is a single SIM (GSM) smartphone that accepts a Micro-SIM. Wi-Fi, GPS, OTG, NFC, Bluetooth, 3G and LTE Networks these all are a lot of Connectivity options. The OnePlus One sensors include Compass, Proximity sensor, Accelerometer, Gyrometer. The Smartphones carries with non-breakable Corning Gorilla Glass 3.
DISCLAIMER: THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. YOU MUST FIRST BACKUP YOUR FULL DATA BEFORE FLASHING YOUR ANDROID DEVICE. TRY AT YOUR OWN RISK. THEREFORE, I AM NOT RESPONSIBLE IF YOUR DEVICE GET DAMAGED OR BRICK. 
Installing a custom ROM on a OnePlus One (OnePlus One) requires the bootloader to be unlocked on the OnePlus One (OnePlus One) phone, which may VOID your warranty. However, it may delete all your data also. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone. Hence, we cannot be held responsible for the mistakes done by you.
Official Lineage OS 15.0 ROM Status for OnePlus One (OnePlus One) Android 8.0 Custom ROM:
WHAT’S WORKING:
– Working
KNOWN PROBLEMS:
– Not Distinguished

Before Starting

Before getting started you must take care of the following task. Thus, it will help you flash your device without any interruption.
Step 1: Install USB drivers for your device on your PC.
Step 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.
Step 3: Make sure that your device must well charge. Ideally, the battery level should be around 60-80%. The more the better.
Step 4: USB Debugging should enable on your device.
Important: Most of the custom ROM will not have Google APPS in them. So, you will have to download and install GAPPS manually. Also, you must take the backup of nandroid before installing custom ROM. Done with preliminary precautionary steps? So, here’s the guide:
So, here’s the guide:
TWRP Recovery allows you to do a plenty of cool stuff. But the point of having any custom recovery is to be capable of flashing unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.
So, now let’s see how to flash a Lineage OS 15.0 ROM on OnePlus One (Oneplus One) using TWRP recovery.

How to Install an official Lineage OS 15.0 ROM on OnePlus One (Oneplus One) Android Oreo 8.0

1. Download and transfer the official Lineage OS ROM and GAPPS for Lineage os you wish to flash to your device’s storage.
2.Now boot your Android device into TWRP recovery.
3. Select “Wipe” from the TWRP main menu and do a “Swipe to Factory Reset” on the bottom of the screen.└ Note: This will factory resets your device. Simply Skip the step if your ROM does not need a factory reset.

4. Now, go back to TWRP main menu, tap on “Install” and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.

  • After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of the screen to begin the custom ROM installation process. This may take some time.


  • So, finally, when your ROM successfully flashed, you’ll see “Wipe cache/dalvik” option. Thus, select it and then do “Swipe to wipe” on the bottom of the screen.
  • Hit the “Back” button once cache & dalvik wipe completes. Also, hit the “Back” button on-screen and then select “Reboot System” button.

{ROM} [Unofficial] Download Lineage OS 15 Xiaomi Mi 5s(Capricon) [Updated October 2017]

by Leave a Comment

LineageOS 15.0 ROM for Xiaomi Mi 5s(Capricon) Android Oreo 8.0 

Today we will give you guide on Xiaomi Mi 5s(Capricon). Official Lineage OS 15.0 ROM is based on the Android Open Source Project with extra contributions from many people within the Android community. You can install the Custom ROM without having need of Google Application Installed. Official LineageOS 15.0 ROM does still include various hardware-specific code, which is also slowly being open-sourced anyway. 


First Check Xiaomi Mi 5s Specification. 

The Smartphone carried out with an AMOLED of 5.15-inch touchscreen display with a resolution of 1080 pixels by 1920 pixels. However, it has a PPI of ~428 pixels density per inch.
The Xiaomi Mi 5s comes along with Quad-core(2×2.15GHz &2×1.6GHz) which packs up with Qualcomm MSM8996 Snapdragon 821 chipset. However, you cannot upgrade via a microSD card slot. The Smartphone carries out with 4GB of RAM with 128GB of internal memory in prime edition. The device picks up the 3GB of RAM and 64GB of internal memory. Xiaomi Mi 5s packs up with 12–Megapixel primary camera on the rear and a 4-megapixel of front shooter for selfies.
The Xiaomi Mi 5s runs on Android 6.0(Marshmallow). The device comes with 3200mAh power non-removable battery. The Smartphone covers 145.6 x 70.3 x 8.3 mm dimensions (height x width x thickness) and weight 145.00 grams.
The Xiaomi Mi 5s is a dual SIM (GSM) smartphone that accepts a Nano-SIM. Wi-Fi, GPS, OTG, Bluetooth, 3G and LTE Networks these all are a lot of Connectivity options. The Xiaomi Mi 5s sensors include Compass, Proximity sensor, Accelerometer, Gyrometer, NFC as well as Fingerprint sensors are also at the bottom of the smartphone. The Smartphones carries with non-breakable Corning Gorilla Glass 4. The Smartphone also carries out the Fast Charging(Quick charge 3.0) which is now a days common. 
DISCLAIMER: THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. YOU MUST FIRST BACKUP YOUR FULL DATA BEFORE FLASHING YOUR ANDROID DEVICE. TRY AT YOUR OWN RISK. THEREFORE, I AM NOT RESPONSIBLE IF YOUR DEVICE GET DAMAGED OR BRICK. 
Installing a custom ROM on a Xiaomi Mi 5s(Capricon) requires the bootloader to be unlocked on the Xiaomi Mi 5s(Capricon) phone, which may VOID your warranty. However, it may delete all your data also. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone. Hence, we cannot be held responsible for the mistakes done by you.
Official Lineage OS 15.0 ROM Status for Xiaomi Mi 5s(Capricon) Android 8.0 Custom ROM:
WHAT’S WORKING:
– Wifi
– NFC
– Calls and Data
– Bluetooth
– Camera
– Video Playback
– Audio
– Sensors
– Flash
– GPS
– LED
KNOWN PROBLEMS:
– Not Distinguished

Before Starting

Before getting started you must take care of the following task. Thus, it will help you flash your device without any interruption.
Step 1: Install USB drivers for your device on your PC.
Step 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.
Step 3: Make sure that your device must well charge. Ideally, the battery level should be around 60-80%. The more the better.
Step 4: USB Debugging should enable on your device.
Important: Most of the custom ROM will not have Google APPS in them. So, you will have to download and install GAPPS manually. Also, you must take the backup of nandroid before installing custom ROM. Done with preliminary precautionary steps? So, here’s the guide:
So, here’s the guide:
TWRP Recovery allows you to do a plenty of cool stuff. But the point of having any custom recovery is to be capable of flashing unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.
So, now let’s see how to flash a LineageOS ROM on Xiaomi Mi 5s(Capricon) using TWRP recovery.

How to Install an official LineageOS on Xiaomi Mi 5s(Capricon) Android Oreo 8.0

1. Download and transfer the official LineageOS ROM and GAPPS for Lineage os you wish to flash to your device’s storage.
2.Now boot your Android device into TWRP recovery.
3. Select “Wipe” from the TWRP main menu and do a “Swipe to Factory Reset” on the bottom of the screen.└ Note: This will factory resets your device. Simply Skip the step if your ROM does not need a factory reset.

4. Now, go back to TWRP main menu, tap on “Install” and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.

  • After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of the screen to begin the custom ROM installation process. This may take some time.


  • So, finally, when your ROM successfully flashed, you’ll see “Wipe cache/dalvik” option. Thus, select it and then do “Swipe to wipe” on the bottom of the screen.
  • Hit the “Back” button once cache & dalvik wipe completes. Also, hit the “Back” button on-screen and then select “Reboot System” button.

{ROM} [Unofficial] Download Lineage OS 15 Xiaomi Mi 3(Cancro) [Updated October 2017]

by Leave a Comment

LineageOS 15.0 ROM for Xiaomi Mi 3(Cancro) Android Oreo 8.0 

Today we will give you guide on Xiaomi Mi 3(Cancro). Official Lineage OS 15.0 ROM is based on the Android Open Source Project with extra contributions from many people within the Android community. You can install the Custom ROM without having need of Google Application Installed. Official LineageOS 15.0 ROM does still include various hardware-specific code, which is also slowly being open-sourced anyway. 


First Check Xiaomi Mi 3 Specification. 

The Smartphone carried out with an AMOLED of 5.0-inch touchscreen display with a resolution of 720 pixels by 1280 pixels. However, it has a PPI of ~294 pixels density per inch.
The Xiaomi Mi 3 comes along with Octa-core(4×1.5GHz & 4×1.2GHz) which packs up with Qualcomm MSM8939v2 Snapdragon 616 chipset. However, you can be upgrade via a microSD card slot upto 256GB. The Smartphone carries out with 2GB of RAM with 16GB of internal memory. Xiaomi Mi 3 packs up with 13–Megapixel primary camera on the rear and a 5-megapixel of front shooter for selfies.
The Xiaomi Mi 3 runs on Android 5.1(Lollipop). The device comes with 4100mAh power non-removable battery. The Smartphone covers 139.3 x 69.6 x 8.5 mm dimensions (height x width x thickness) and weight 144.00 grams.
The Xiaomi Mi 3 is a dual SIM (GSM) smartphone that accepts a Nano-SIM. Wi-Fi, GPS, OTG, Bluetooth, 3G and LTE Networks these all are a lot of Connectivity options. The Xiaomi Mi 3 sensors include Compass, Proximity sensor, Accelerometer, Gyrometer. The Smartphones carries with non-breakable Corning Gorilla Glass 2. The Smartphone also carries out the Fast Charging(Quick charge 2.0) which is now a days common. 
DISCLAIMER: THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. YOU MUST FIRST BACKUP YOUR FULL DATA BEFORE FLASHING YOUR ANDROID DEVICE. TRY AT YOUR OWN RISK. THEREFORE, I AM NOT RESPONSIBLE IF YOUR DEVICE GET DAMAGED OR BRICK. 
Installing a custom ROM on a Xiaomi Mi 3(Cancro) requires the bootloader to be unlocked on the Xiaomi Mi 3(Cancro) phone, which may VOID your warranty. However, it may delete all your data also. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone. Hence, we cannot be held responsible for the mistakes done by you.
Official Lineage OS 15.0 ROM Status for Xiaomi Mi 3(Cancro) Android 8.0 Custom ROM:
WHAT’S WORKING:
– Wifi
– NFC
– Calls and Data
– Bluetooth
– Camera
– Video Playback
– Audio
– Sensors
– Flash
– GPS
– LED
KNOWN PROBLEMS:
– Not Distinguished

Before Starting

Before getting started you must take care of the following task. Thus, it will help you flash your device without any interruption.
Step 1: Install USB drivers for your device on your PC.
Step 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.
Step 3: Make sure that your device must well charge. Ideally, the battery level should be around 60-80%. The more the better.
Step 4: USB Debugging should enable on your device.
Important: Most of the custom ROM will not have Google APPS in them. So, you will have to download and install GAPPS manually. Also, you must take the backup of nandroid before installing custom ROM. Done with preliminary precautionary steps? So, here’s the guide:
So, here’s the guide:
TWRP Recovery allows you to do a plenty of cool stuff. But the point of having any custom recovery is to be capable of flashing unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.
So, now let’s see how to flash a LineageOS ROM on Xiaomi Mi 3(Cancro) using TWRP recovery.

How to Install an official LineageOS on Xiaomi Mi 3(Cancro) Android Oreo 8.0

1. Download and transfer the official LineageOS ROM and GAPPS for Lineage os you wish to flash to your device’s storage.
2.Now boot your Android device into TWRP recovery.
3. Select “Wipe” from the TWRP main menu and do a “Swipe to Factory Reset” on the bottom of the screen.└ Note: This will factory resets your device. Simply Skip the step if your ROM does not need a factory reset.

4. Now, go back to TWRP main menu, tap on “Install” and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.

  • After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of the screen to begin the custom ROM installation process. This may take some time.


  • So, finally, when your ROM successfully flashed, you’ll see “Wipe cache/dalvik” option. Thus, select it and then do “Swipe to wipe” on the bottom of the screen.
  • Hit the “Back” button once cache & dalvik wipe completes. Also, hit the “Back” button on-screen and then select “Reboot System” button.