LineageOS 15.1 for Lenovo ZUK Z2

LineageOS 15.1 Asus Zenfone 2 Laser Selfie 1080p [Z00T] Android 8.1 {DOWNLOAD}

Today we will give you guide on Asus Zenfone 2 Laser/Selfie (1080p) [Z00T]. LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. You can install the Custom ROM without having need of Google Application Installed. Official LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

Asus Zenfone 2 Laser Selfie Specifications

The smartphone comes with a IPS LCD of 5.5-inch touchscreen display with a resolution of 1080 pixel by 1920 pixels. However, it has a PPI of 401 pixels density per inch.
The Asus Zenfone 2 Laser comes along with 2.5GHz quad-core Qualcomm Snapdragon 801 processor and with 2GB of RAM. The Smartphone packs up with 16GB of internal storage. However, you can upgrade up to 64GB via a microSD card. Asus Zenfone 2 Laser packs a 13-Megapixel primary camera on the rear and an 5-megapixel front shooter for selfies.
The Asus Zenfone 2 Laser runs on Android 6 and comes with  3000mAh power non-removable battery. The Smartphone covers 155.7 x 77.3 x 8.9 mm dimensions (height x width x thickness) and weight 170.00 grams.
The Asus Zenfone 2 Laser is a dual SIM (GSM) smartphone that accepts a Nano-SIM. Wi-Fi, GPS, Bluetooth, USB OTG, 3G and 4G (LTE networks) these all are a lot of Connectivity options. The Asus Zenfone 2 Laser sensors include Compass, Proximity sensor, Accelerometer, Ambient light sensor and Gyroscope.
DISCLAIMER: THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. YOU MUST FIRST BACKUP YOUR FULL DATA BEFORE FLASHING YOUR ANDROID DEVICE. TRY AT YOUR OWN RISK. THEREFORE, I AM NOT RESPONSIBLE IF YOUR DEVICE GET DAMAGED OR BRICK. 
Installing a custom ROM on  Asus Zenfone 2 Laser/Selfie (1080p) [Z00T] requires to Unlock Bootloader on the Asus Zenfone 2 Laser/Selfie (1080p) [Z00T] phone, which may VOID your warranty. However, it may delete all your data also. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone. Hence, we cannot be held responsible for the mistakes done by you.
Status:- LineageOS 15.1 Asus Zenfone 2 Laser/Selfie (1080p) [Z00T] Oreo 8.1 Custom ROM
WHAT’S WORKING:
– RIL
– Wifi
– Bluetooth
– Video Playback
– Audio
– Sensors
– Flash
– LED
– GPS
KNOWN PROBLEMS:
– Camera
– Speakers don’t work on ZE600KL Model
– SELinux is premissive

Before Starting

Before getting started you must take care of the following task. Thus, it will help you flash your device without any interruption.
Step 1: Install USB drivers for your device on your PC.
Step 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.
Step 3: Make sure that your device must well charge. Ideally, the battery level should be around 60-80%. The more the better.
Step 4: USB Debugging should enable on your device.
Important: Most of the custom ROM will not have Google APPS in them. So, you will have to download and install GAPPS manually. Also, you must take the backup of nandroid before installing custom ROM. Done with preliminary precautionary steps? So, here’s the guide:
So, here’s the guide:
TWRP Recovery allows you to do a plenty of cool stuff. But the point of having any custom recovery is to be capable of flashing unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.
Let’s see how to flash a LineageOS ROM on Asus Zenfone 2 Laser/Selfie (1080p) [Z00T] using TWRP recovery.

How to install LineageOS 15.1 Asus Zenfone 2 Laser Selfie 1080p [Z00T] Android 8.1 ROM?

      1. Download and transfer the official LineageOS ROM and GAPPS for Lineage os you wish to flash to your device’s storage.

    1. Now boot your Android device into TWRP recovery.
    2. Select “Wipe” from the TWRP main menu and do a “Swipe to Factory Reset” on the bottom of the screen.
      └ Note: This will factory resets your device. Simply Skip the step if your ROM does not need a factory reset.
    3.  Now, go back to TWRP main menu, tap on “Install” and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.
  • After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of the screen to begin the custom ROM installation process. This may take some time.
  •  So, finally, when your ROM successfully flashed, you’ll see “Wipe cache/dalvik” option. Thus, select it and then do “Swipe to wipe” on the bottom of the screen.
  • Hit the “Back” button once cache & dalvik wipe completes. Also, hit the “Back” button on-screen and then select “Reboot System” button.
See also  [Update] How to Download and Install MIUI 9 Xiaomi Mi Note 2?

Download Links

Leave a Reply

Your email address will not be published. Required fields are marked *