LineageOS

The Unofficial Blog

{UPDATED}[Unofficial] Download Lineage OS 15 Android Oreo 8.0 for Xiaomi Redmi Note 4(Mido) [2018]

by Leave a Comment

LineageOS 15.0 ROM for Xiaomi Redmi Note 4(Mido) Android Oreo 8.0 

Today we will give you guide on Xiaomi Redmi Note 4(Mido). Official Lineage OS 15.0 ROM is based on the Android Open Source Project with extra contributions from many people within the Android community. You can install the Custom ROM without having need of Google Application Installed. Official LineageOS 15.0 ROM does still include various hardware-specific code, which is also slowly being open-sourced anyway. In the previous tutorial we have already explain that how you can install Lineage 14 Redmi Note 4 Device. 


First Check Xiaomi Redmi Note 4 Specification. 

The Smartphone carried out with an AMOLED of 5.5-inch touchscreen display with a resolution of 1080 pixels by 1920 pixels. However, it has a PPI of ~401 pixels density per inch.
The Xiaomi Redmi Note 4 comes along with Octa-core 2.0 GHz which packs up with Qualcomm MSM8953 Snapdragon 625 chipset. However, you can upgrade via a microSD card slot upto 256GB. The Smartphone carries out with 2GB of RAM with 32GB of internal memory in standard edition. The device picks up the 3GB of RAM and 32GB of internal memory. Premium version packs up with 4GB of RAM with 64GB internal memory. Xiaomi Redmi Note 4 packs up with 13–Megapixel primary camera on the rear and a 5-megapixel of front shooter for selfies.
The Xiaomi Redmi Note 4 runs on Android 7.0(Nougat). The device comes with 4100mAh power non-removable battery. The Smartphone covers 151 x 76 x 8.5 mm dimensions (height x width x thickness) and weight 165.00 grams.
The Xiaomi Redmi Note 4 is Hybrid-dual SIM (GSM) smartphone that accepts a Nano-SIM. Wi-Fi, GPS, OTG, Bluetooth, 3G and LTE Networks these all are a lot of Connectivity options. The Xiaomi Redmi Note 4 sensors include Compass, Proximity sensor, Accelerometer, Gyrometer. The Smartphones carries with non-breakable Corning Gorilla Glass 4. So, here is the full guide to install Lineage OS Redmi Note 4 Oreo version in your device.  
DISCLAIMER: THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. YOU MUST FIRST BACKUP YOUR FULL DATA BEFORE FLASHING YOUR ANDROID DEVICE. TRY AT YOUR OWN RISK. THEREFORE, I AM NOT RESPONSIBLE IF YOUR DEVICE GET DAMAGED OR BRICK. 
Installing a custom ROM on a Xiaomi Redmi Note 4(Mido) requires the bootloader to be unlocked on the Xiaomi Redmi Note 4(Mido) phone, which may VOID your warranty. However, it may delete all your data also. Before proceeding further you may consider backup all data on the phone. So, checkout the full guide for LineageOS 15 Mido (codename for Redmi Note 4). You are the only person doing changes to your phone. Hence, we cannot be held responsible for the mistakes done by you.
Official Lineage OS 15.0 ROM Status for Xiaomi Redmi Note 4(Mido) Android 8.0 Custom ROM:
So, here is the status for the Lineage OS 15 Mido you guys can check what is working…

WHAT’S WORKING:

– Wifi
– NFC
– Calls and Data
– Bluetooth
– Camera
– Video Playback
– Audio
– Sensors
– Flash
– GPS
– LED
– Fingerprint
– IR Blaster
– Camcorder Video Player
– VOLTE
KNOWN PROBLEMS:
– Not Distinguished!
– Tell us if you Know!

Before Starting

Before getting started you must take care of the following task. Thus, it will help you flash your device without any interruption.
Step 1: Install USB drivers for your device on your PC.
Step 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.
Step 3: Make sure that your device must well charge. Ideally, the battery level should be around 60-80%. The more the better.
Step 4: USB Debugging should enable on your device.
Important: Most of the custom ROM will not have Google APPS in them. So, you will have to download and install GAPPS manually. Also, you must take the backup of nandroid before installing custom ROM. Done with preliminary precautionary steps? So, here’s the guide:
So, here’s the guide:
TWRP Recovery allows you to do a plenty of cool stuff. But the point of having any custom recovery is to be capable of flashing unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.
So, now let’s see how to flash a LineageOS ROM on Xiaomi Redmi Note 4 (Mido) using TWRP recovery.

How to Install an official LineageOS on Xiaomi Redmi Note 4 (Mido) Android Oreo 8.0

1. Download and transfer the official LineageOS ROM and GAPPS for Lineage os you wish to flash to your device’s storage.
2.Now boot your Android device into TWRP recovery.
3. Select “Wipe” from the TWRP main menu and do a “Swipe to Factory Reset” on the bottom of the screen.└ Note: This will factory resets your device. Simply Skip the step if your ROM does not need a factory reset.

4. Now, go back to TWRP main menu, tap on “Install” and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.

  • After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of the screen to begin the custom ROM installation process. This may take some time.


  • So, finally, when your ROM successfully flashed, you’ll see “Wipe cache/dalvik” option. Thus, select it and then do “Swipe to wipe” on the bottom of the screen.
  • Hit the “Back” button once cache & dalvik wipe completes. Also, hit the “Back” button on-screen and then select “Reboot System” button.

Download – OFFICIAL LINEAGE OS 15.0 ROM for Xiaomi Redmi Note 4(Mido)

You can share some more cool and exciting methods to install Lineage OS 15 Mido. Do let us know in the comment section if you have some. Also, we have some new stuff related to MIUI 9 feedbacks have a look right here. 

Feedback from our Team & Users 

So, many of you guys are waiting for the Official Lineage OS for Xiaomi Redmi Note 4. As, we are constantly searching for “Mido” (basically a codename for Xiaomi Redmi Note 4). So, after hearing from the users the first official build is however, as good as the MIUI 8.2 developer. The users also confirms that MIUI 8.2 almost has no lag or boot loops. As, we are happy to tell you that now you can download and install MIUI 9 on your devices. 
Feedback from our team is that some of us are not happy with the performance of the smartphone as well as main cameras. Since, users are quite happy with performance of Lineage OS. Also, our team expect that LineageOS soon give update of LineageOS 15.1 Oreo 8.1 for Xiaomi Redmi Note 4. Some users tweeted us that Volte is not working and some issues are coming with Network setting. Now, the Volte is woking properly and is fixed after the update of Lineage os redmi note 4 oreo version. However, after getting the Lineage OS redmi note 4 official ROM update the fingerprint problem is also fixed.      

So, what’s your decision of installing LineageOS ROM? Did you guys have used the LineageOS ROM if yes than do comment in the comment box for any Assistance. If you guys think that you have some more ROMS for Xiaomi Redmi Note 4 than do share with us. If you have some more cooler things to share it with us then let us know? Feedbacks of users is very much important before installing any ROM. So, these are Feedback from team and hope you guys enjoyed and excited to install LineageOS ROM.

[Unofficial]{UPDATED} Download Lineage OS 15 Oreo Xiaomi Redmi Note 3(Kenzo/Kate) [January 2018]

by Leave a Comment

LineageOS 15.0 ROM for Xiaomi Redmi Note 3 (Kenzo/Kate) Android Oreo 8.0 

Today we will give you guide on how to update Lineage os 15 Redmi Note 3 XDA (Kenzo/Kate). Official Lineage OS 15.0 ROM is based on the Android Open Source Project with extra contributions from many people within the Android community. You can install the Custom ROM without having need of Google Application Installed. Official LineageOS 15.0 ROM does still include various hardware-specific code, which is also slowly being open-sourced anyway. Also, you guys can download the LineageOS 14.1 Redmi Note 3 Nougat version in your device as well.

First Check Xiaomi Redmi Note 3 Specification. 

The Smartphone carried out with an AMOLED of 5.5-inch touchscreen display with a resolution of 1080 pixels by 1920 pixels. However, it has a PPI of ~403 pixels density per inch.

The Xiaomi Redmi Note 3 comes along with Hexa-core(4×1.4GHz &2×1.8GHz) which packs up with Qualcomm MSM8956 Snapdragon 650 chipset. However, you can upgrade via a microSD card slot upto 256GB. The Smartphone carries out with 2GB of RAM with 16GB of internal memory in standard edition. The device picks up the 3GB of RAM and 32GB of internal memory. Xiaomi Redmi Note 3 packs up with 16–Megapixel primary camera on the rear and a 5-megapixel of front shooter for selfies.
The Xiaomi Redmi Note 3 runs on Android 6.0.1(Marshmallow). The device comes with 4050mAh power non-removable battery. The Smartphone covers 150 x 76 x 8.7 mm dimensions (height x width x thickness) and weight 164.00 grams.
The Xiaomi Redmi Note 3 is Hybrid-dual SIM (GSM) smartphone that accepts a Nano-SIM. Wi-Fi, GPS, OTG, Bluetooth, 3G and LTE Networks these all are a lot of Connectivity options. The Xiaomi Redmi Note 3 sensors include Compass, Proximity sensor, Accelerometer, Gyrometer, as well as Fingerprint sensors are also at the bottom of the smartphone. The Smartphones carries with non-breakable Corning Gorilla Glass 4. The Smartphone also carries out the Fast Charging(Quick charge 2.0) which is now a days common.
This is all about the redmi note 3. As we have finally got up the Redmi Note 3 Lineage OS 15 update and now you can download it from the below link. So let’s get started with the guide.   
DISCLAIMER: THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. YOU MUST FIRST BACKUP YOUR FULL DATA BEFORE FLASHING YOUR ANDROID DEVICE. TRY AT YOUR OWN RISK. THEREFORE, I AM NOT RESPONSIBLE IF YOUR DEVICE GET DAMAGED OR BRICK. 
Installing a custom ROM on a Xiaomi Redmi Note 3(Kenzo/Kate) requires the bootloader to be unlocked on the Xiaomi Redmi Note 3(Kenzo/Kate) phone, which may VOID your warranty. However, it may delete all your data also. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone. Hence, we cannot be held responsible for the mistakes done by you.

Official Lineage OS Oreo Xiaomi Redmi Note 3 ROM Status (Kenzo/Kate) Android Oreo 8.0:
WHAT’S WORKING:
– Wifi
– NFC
– Calls and Data
– Bluetooth
– Camera
– Video Playback
– Audio
– Sensors
– Flash
– GPS
– Fingerprint
– LED
– Volte
– Camcorder
KNOWN PROBLEMS:
– Goodix fp Sensor

Before Starting

Before getting started you must take care of the following task. Thus, it will help you flash your device without any interruption.
Step 1: Install USB drivers for your device on your PC.
Step 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.
Step 3: Make sure that your device must well charge. Ideally, the battery level should be around 60-80%. The more the better.
Step 4: USB Debugging should enable on your device.
Important: Most of the custom ROM will not have Google APPS on them. So, you will have to download and install GAPPS manually. Also, you must take the backup of nandroid before installing custom ROM. Done with preliminary precautionary steps?

See also: MIUI 9 Feedback, Bugs Fixed, New Releases, Beta Testers Working Properly  


So, here’s the guide:

TWRP Recovery allows you to do a plenty of cool stuff. But the point of having any custom recovery is to be capable of flashing unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.
So, now let’s see how to flash a LineageOS15 Kenzo on Xiaomi Redmi Note 3 (Kenzo/Kate) using TWRP recovery.

How to Install an LineageOS on Xiaomi Redmi Note 3 (Kenzo/Kate) Android Oreo 8.0

1. Download and transfer the official LineageOS ROM and GAPPS for Lineage os you wish to flash to your device’s storage.
2.Now boot your Android device into TWRP recovery.
3. Select “Wipe” from the TWRP main menu and do a “Swipe to Factory Reset” on the bottom of the screen.└ Note: This will factory resets your device. Simply Skip the step if your ROM does not need a factory reset.

4. Now, go back to TWRP main menu, tap on “Install” and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.

  • After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of the screen to begin the custom ROM installation process. This may take some time.
  • So, finally, when your ROM successfully flashed, you’ll see “Wipe cache/dalvik” option. Thus, select it and then do “Swipe to wipe” on the bottom of the screen.
  • Hit the “Back” button once cache & dalvik wipe completes. Also, hit the “Back” button on-screen and then select “Reboot System” button.

Download – OFFICIAL LINEAGE OS 15.0 ROM for Xiaomi Redmi Note 3 (Kenzo/Kate)


Feedback from our Team & Users 

So, many of you guys are waiting for the Official Lineage OS for Xiaomi Redmi Note 3. As, we are looking for constantly searching for “Kenzo/Kate” (basically a codename for Xiaomi Redmi Note 3). So, after hearing from the users the first official build is however, as good as the MIUI 8.2 developer. The users also confirms that MIUI 8.2 almost has no lag or boot loops. As, we are happy to tell you that now you can download and install MIUI 9 on your devices. 
Feedback from our team is that some of us are not happy with the images clicked with there respective smartphone main cameras. Since, users are quite happy with performance of Lineage OS. Also, our team expect that LineageOS soon give update of LineageOS 15.1 Oreo for Xiaomi Redmi Note 3. Some users tweeted us that Volte is not working and some issues are coming with Network setting. So, Volte is now woking propely. Now talking about the Fingerprint sensors the Fingerprint is also, working properly in redmi note 3.

So, what’s your decision of installing LineageOS ROM? Did you guys have used the LineageOS ROM if yes than do comment in the comment section about your experience. If you have some more cooler things to share it with us then let us know? Feedbacks of users is very much important before installing any ROM. So, these are Feedback from team and hope you guys enjoyed and excited to install LineageOS ROM.

{UPDATED} Download Lineage OS 16 Android Pie 9.0 for Xiaomi Mi4c(Libra)

by Leave a Comment

LineageOS 16.0 ROM for Xiaomi Mi 4c(Libra) Android Pie 9.0 

Today we will give you guide on Xiaomi Mi4c Oreo update. Lineage OS 16.0 ROM is based on the Android Open Source Project with extra contributions from many people within the Android community. You can install the Custom ROM without having need of Google Application Installed. Official LineageOS 15.0 ROM does still include various hardware-specific code, which is also slowly being open-sourced anyway. In the previous tutorial we have already explain that how you can install Lineage 14.1 Mi4c Device.  

 let’s check the full guide to install Lineage OS for Mi4c Oreo. 

DISCLAIMER: THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. YOU MUST FIRST BACKUP YOUR FULL DATA BEFORE FLASHING YOUR ANDROID DEVICE. TRY AT YOUR OWN RISK. THEREFORE, I AM NOT RESPONSIBLE IF YOUR DEVICE GET DAMAGED OR BRICK. 
Installing a custom ROM on a Xiaomi Mi 4c(Libra) requires the bootloader to be unlocked on the Xiaomi Mi 4c(Libra) phone, which may VOID your warranty. However, it may delete all your data also. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone. So, check the full guide of Mi4c Oreo update. Hence, we cannot be held responsible for the mistakes done by you. 
Official Lineage OS 16 Mi4c(Libra) Status for Android Pie 9.0 Custom ROM:
WHAT’S WORKING:
– Wifi
– NFC
– Calls and Data
– Bluetooth
– Camera
– Video Playback
– Audio
– Sensors
– Flash
– GPS
– LED
– Fingerprint
– VOLTE
KNOWN PROBLEMS:
– Not Distinguished

Before Starting

Before getting started you must take care of the following task. Thus, it will help you flash your device without any interruption.
Step 1: Install USB drivers for your device on your PC.
Step 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.
Step 3: Make sure that your device must well charge. Ideally, the battery level should be around 60-80%. The more the better.
Step 4: USB Debugging should enable on your device.
Important: Most of the custom ROM will not have Google APPS in them. So, you will have to download and install GAPPS manually. Also, you must take the backup of nandroid before installing custom ROM. Done with preliminary precautionary steps? So, here’s the guide:
So, here’s the guide:
TWRP Recovery allows you to do a plenty of cool stuff. But the point of having any custom recovery is to be capable of flashing unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.
So, now let’s see how to flash a LineageOS ROM on Xiaomi Mi 4c(Libra) using TWRP recovery.

How to Install an official LineageOS on Xiaomi Mi 4c(Libra) Android Pie 9.0

1. Download and transfer the official LineageOS ROM and GAPPS for Lineage os you wish to flash to your device’s storage.
2.Now boot your Android device into TWRP recovery.
3. Select “Wipe” from the TWRP main menu and do a “Swipe to Factory Reset” on the bottom of the screen.└ Note: This will factory resets your device. Simply Skip the step if your ROM does not need a factory reset.

4. Now, go back to TWRP main menu, tap on “Install” and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.

  • After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of the screen to begin the custom ROM installation process. This may take some time.


  • So, finally, when your ROM successfully flashed, you’ll see “Wipe cache/dalvik” option. Thus, select it and then do “Swipe to wipe” on the bottom of the screen.
  • Hit the “Back” button once cache & dalvik wipe completes. Also, hit the “Back” button on-screen and then select “Reboot System” button.

Download – OFFICIAL LINEAGE OS 16.0 ROM for Xiaomi Mi 4c(Libra)

You can share some more cool and exciting methods to install Lineage OS for Mi4c. Do let us know in the comment section if you have some. Also, we have some new stuff related to MIUI 9 feedbacks have a look right here.

Lets Check Xiaomi Mi4c Specification. 

The Smartphone carried out with an AMOLED of 5.0-inch touchscreen display with a resolution of 1080 pixels by 1920 pixels. However, it has a PPI of ~441 pixels density per inch.
The Xiaomi Mi4c comes along with Hexa-core(4×1.4GHz & 2×1.8GHz) which packs up with Qualcomm MSM8992 Snapdragon 820 chipset. However, you cannot upgrade via a microSD card slot. The Smartphone carries out with 2GB of RAM with 16GB of internal memory in standard edition. The device picks up the 3GB of RAM and 32GB of internal memory. Xiaomi Mi4c packs up with 13–Megapixel primary camera on the rear and a 5-megapixel of front shooter for selfies.
The Xiaomi Mi4c runs on Android 5.1.1(Lollipop). The device comes with 3080mAh power non-removable battery. The Smartphone covers 138.1 x 69.6 x 7.8 mm dimensions (height x width x thickness) and weight 132.00 grams.

The Xiaomi Mi4c is dual SIM (GSM) smartphone that accepts a Nano-SIM. Wi-Fi, GPS, OTG, Bluetooth, 3G and LTE Networks these all are a lot of Connectivity options. The Xiaomi Mi4c sensors include Compass, Proximity sensor, Accelerometer, Gyrometer, as well as Fingerprint sensors are also at the bottom of the smartphone. The Smartphone also carries out the Fast Charging(Quick charge 2.0) which is now a days common. 

Feedback from our Team & Users 

So, many of you guys are waiting for the Official Lineage OS for Xiaomi Mi4c. As, we are constantly searching for “Libra” (basically a codename for Xiaomi Mi4c). So, after hearing from the users the first official build is however, as good as the MIUI 8.2 developer. The users also confirms that MIUI 8.2 almost has no lag or boot loops. As, we are happy to tell you that now you can download and install MIUI 9 on your devices. 
Feedback from our team is that some of us are not happy with the performance of the smartphone as well as main cameras. Since, users are quite happy with performance of Lineage OS. Also, our team expect that LineageOS soon give update of LineageOS 15.1 Oreo 8.1 for Xiaomi Mi4c. Some users tweeted us that Volte is not working and some issues are coming with Network setting. Volte is woking properly now and fix after the update of lineage os 15 Mi4c. Now talking about the Fingerprint sensors the Fingerprint is also, not working in some of the device. After the new update of Lineage OS 16 Mi4c ROM the fingerprint problem is also fixed.      

So, what’s your decision of installing LineageOS ROM? Did you guys have used the LineageOS ROM if yes than do comment in the comment box for any Assistance. If you guys think that you have some more ROMS for Mi4c than do share with us. If you have some more cooler things to share it with us then let us know? Feedbacks of users is very much important before installing any ROM. So, these are Feedback from team and hope you guys enjoyed and excited to install LineageOS ROM.

{ROM} [Unofficial] Download Lineage OS 15 Xiaomi Mi 5(Gemini) [Updated October 2017]

by Leave a Comment

LineageOS 15.0 ROM for Xiaomi Mi 5(Gemini) Android Oreo 8.0 

Today we will give you guide on Xiaomi Mi 5(Gemini). Official Lineage OS 15.0 ROM is based on the Android Open Source Project with extra contributions from many people within the Android community. You can install the Custom ROM without having need of Google Application Installed. Official LineageOS 15.0 ROM does still include various hardware-specific code, which is also slowly being open-sourced anyway. 


First Check Xiaomi Mi 5 Specification. 

The Smartphone carried out with an AMOLED of 5.15-inch touchscreen display with a resolution of 1080 pixels by 1920 pixels. However, it has a PPI of ~428 pixels density per inch.
The Xiaomi Mi 5 comes along with Quad-core (2×1.8GHz &2×1.36GHz)-Standard Edition. The Prime and Pro Edition packs up Quad-core(2×2.15GHz &2×1.6GHz). The standard & pro edition packs up with Qualcomm MSM8996 Snapdragon 820 chipset. However, you cannot upgrade via a microSD card slot. The Smartphone carries out with 4GB of RAM with 128GB of internal memory in pro edition. The device picks up the 3GB of RAM and 64GB of internal memory in Prime edition. Also, the standard edition packs 3GB of RAM with 32GB of internal memory. Xiaomi Mi 5 packs up with 16–Megapixel primary camera on the rear and a 4-megapixel of front shooter for selfies.
The Xiaomi Mi 5 runs on Android 7.0(Nougat). The device comes with 3000mAh power non-removable battery. The Smartphone covers 144.6 x 69.2 x 7.3 mm dimensions (height x width x thickness) and weight 129.00 grams.
The Xiaomi Mi 5 is a dual SIM (GSM) smartphone that accepts a Nano-SIM. Wi-Fi, GPS, OTG, Bluetooth, 3G and LTE Networks these all are a lot of Connectivity options. The Xiaomi Mi 5 sensors include Compass, Proximity sensor, Accelerometer, Gyrometer, NFC as well as Fingerprint sensors are also at the bottom of the smartphone. The Smartphones carries with non-breakable Corning Gorilla Glass 4. The Smartphone also carries out the Fast Charging(Quick charge 3.0) which is now a days common. 
DISCLAIMER: THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. YOU MUST FIRST BACKUP YOUR FULL DATA BEFORE FLASHING YOUR ANDROID DEVICE. TRY AT YOUR OWN RISK. THEREFORE, I AM NOT RESPONSIBLE IF YOUR DEVICE GET DAMAGED OR BRICK. 
Installing a custom ROM on a Xiaomi Mi 5(Gemini) requires the bootloader to be unlocked on the Xiaomi Mi 5(Gemini) phone, which may VOID your warranty. However, it may delete all your data also. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone. Hence, we cannot be held responsible for the mistakes done by you.
Official Lineage OS 15.0 ROM Status for Xiaomi Mi 5(Gemini) Android 8.0 Custom ROM:
WHAT’S WORKING:
– Wifi
– NFC
– Calls and Data
– Bluetooth
– Camera
– Video Playback
– Audio
– Sensors
– Flash
– GPS
– LED
KNOWN PROBLEMS:
– Not Distinguished

Before Starting

Before getting started you must take care of the following task. Thus, it will help you flash your device without any interruption.
Step 1: Install USB drivers for your device on your PC.
Step 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.
Step 3: Make sure that your device must well charge. Ideally, the battery level should be around 60-80%. The more the better.
Step 4: USB Debugging should enable on your device.
Important: Most of the custom ROM will not have Google APPS in them. So, you will have to download and install GAPPS manually. Also, you must take the backup of nandroid before installing custom ROM. Done with preliminary precautionary steps? So, here’s the guide:
So, here’s the guide:
TWRP Recovery allows you to do a plenty of cool stuff. But the point of having any custom recovery is to be capable of flashing unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.
So, now let’s see how to flash a LineageOS ROM on Xiaomi Mi 5(Gemini) using TWRP recovery.

How to Install an official LineageOS on Xiaomi Mi 5(Gemini) Android Oreo 8.0

1. Download and transfer the official LineageOS ROM and GAPPS for Lineage os you wish to flash to your device’s storage.
2.Now boot your Android device into TWRP recovery.
3. Select “Wipe” from the TWRP main menu and do a “Swipe to Factory Reset” on the bottom of the screen.└ Note: This will factory resets your device. Simply Skip the step if your ROM does not need a factory reset.

4. Now, go back to TWRP main menu, tap on “Install” and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.

  • After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of the screen to begin the custom ROM installation process. This may take some time.


  • So, finally, when your ROM successfully flashed, you’ll see “Wipe cache/dalvik” option. Thus, select it and then do “Swipe to wipe” on the bottom of the screen.
  • Hit the “Back” button once cache & dalvik wipe completes. Also, hit the “Back” button on-screen and then select “Reboot System” button.

[Oreo]{ROM}Download Lineage OS Android 8.0 Sony Xperia SP(Huashan) [Updated October 2017]

by Leave a Comment

LineageOS 15.0 ROM for Sony Xperia SP(Huashan) Android Oreo 8.0 

Today we will give you guide on Sony Xperia SP(Huashan). Official Lineage OS 15.0 ROM is based on the Android Open Source Project with extra contributions from many people within the Android community. You can install the Custom ROM without having need of Google Application Installed. Official LineageOS 15.0 ROM does still include various hardware-specific code, which is also slowly being open-sourced anyway. 


First Check Sony Xperia SP Specification. 

The Smartphone carried out with an AMOLED of 4.6-inch touchscreen display with a resolution of 720 pixels by 1280 pixels. However, it has a PPI of ~319 pixels density per inch.
The Sony Xperia SP comes along with Dual-core 1.5GHz which packs up with Qualcomm MSM8260T Snapdragon S4 Pro. However, you can also upgrade via a microSD card slot upto 32GB. The Smartphone carries out with 1GB of RAM with 8GB of internal memory. Sony Xperia SP model packs up with 8–Megapixel primary camera on the rear and a VGA of front shooter for selfies.
The Sony Xperia SP runs on Android 4.3(JellyBean). The device comes with 2370mAh power non-removable battery. The Smartphone covers 130.6 x 67.1 x 10 mm dimensions (height x width x thickness) and weight 155.00 grams.
The Sony Xperia SP is a dual SIM (GSM) smartphone that accepts a Microo-SIM. Wi-Fi, GPS, OTG, Bluetooth, 3G and LTE Networks these all are a lot of Connectivity options. The Sony Xperia SP sensors include Compass, Proximity sensor, Accelerometer, Gyrometer, NFC as well. The Smartphones carries with non-breakable Shatter Proof Glass.
DISCLAIMER: THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. YOU MUST FIRST BACKUP YOUR FULL DATA BEFORE FLASHING YOUR ANDROID DEVICE. TRY AT YOUR OWN RISK. THEREFORE, I AM NOT RESPONSIBLE IF YOUR DEVICE GET DAMAGED OR BRICK. 
Installing a custom ROM on a Sony Xperia SP(Huashan) requires the bootloader to be unlocked on the Sony Xperia SP(Huashan) phone, which may VOID your warranty. However, it may delete all your data also. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone. Hence, we cannot be held responsible for the mistakes done by you.
Official Lineage OS 15.0 ROM Status for Sony Xperia SP(Huashan) Android 8.0 Custom ROM:
WHAT’S WORKING:
– Working
KNOWN PROBLEMS:
– Not Distinguished

Before Starting

Before getting started you must take care of the following task. Thus, it will help you flash your device without any interruption.
Step 1: Install USB drivers for your device on your PC.
Step 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.
Step 3: Make sure that your device must well charge. Ideally, the battery level should be around 60-80%. The more the better.
Step 4: USB Debugging should enable on your device.
Important: Most of the custom ROM will not have Google APPS in them. So, you will have to download and install GAPPS manually. Also, you must take the backup of nandroid before installing custom ROM. Done with preliminary precautionary steps? So, here’s the guide:
So, here’s the guide:
TWRP Recovery allows you to do a plenty of cool stuff. But the point of having any custom recovery is to be capable of flashing unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.
So, now let’s see how to flash a LineageOS ROM on Sony Xperia SP(Huashan) using TWRP recovery.

How to Install an official LineageOS on Sony Xperia SP(Huashan) Android Oreo 8.0

1. Download and transfer the official LineageOS ROM and GAPPS for Lineage os you wish to flash to your device’s storage.
2.Now boot your Android device into TWRP recovery.
3. Select “Wipe” from the TWRP main menu and do a “Swipe to Factory Reset” on the bottom of the screen.└ Note: This will factory resets your device. Simply Skip the step if your ROM does not need a factory reset.

4. Now, go back to TWRP main menu, tap on “Install” and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.

  • After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of the screen to begin the custom ROM installation process. This may take some time.


  • So, finally, when your ROM successfully flashed, you’ll see “Wipe cache/dalvik” option. Thus, select it and then do “Swipe to wipe” on the bottom of the screen.

  • Hit the “Back” button once cache & dalvik wipe completes. Also, hit the “Back” button on-screen and then select “Reboot System” button.
Frequently Asked Questions

Q : Where can I change the Quick Tiles and Status Bar?
A : Long Press the “Setting” icon in the notiication drawer. Now you will get the access to the “System UI Tuner” from there you can edit.

Q : [Oreo] System Dialog box is showing up during the boot time.
A : Normal issue for the devices and is common in almost all the devices. Yet to be fixed by the developers.   
Q : Does the Custom ROM is suited for the daily usage or not?
A : No, there is no problem and check out the List before installing it.

Q : {Oreo} Downloaded files cannot be opened directly?
A : Not a major problem, For now all you have to do is use “Show internal Storage” and open the files directly.