Today we will give you a guide on YU Yuphoria (Lettuce). Official LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. You can install the Custom ROM without having the need for Google Application Installed. Official LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
YU Yuphoria Specifications
The Smartphone carried out with an IPS LCD of 5.0-inch touchscreen display with a resolution of 720 pixels by 1280 pixels. However, it has a PPI of ~294 pixels density per inch.
The YU Yuphoria comes along with 1.2GHz quad-core Qualcomm MSM8916 Snapdragon 410 processor and with 2GB of RAM. The Smartphone packs up with 16GB of internal storage. However, you can upgrade up to 32GB via a microSD card. YU Yuphoria packs an 8-Megapixel primary camera on the rear and a 5-megapixel front shooter for selfies.
The YU Yuphoria runs on Android 5.0.2. The device comes with a 2230mAh power removable battery. The Smartphone covers 142.4 x 73 x 8.2-9.35 mm dimensions (height x width x thickness) and weight 143.00 grams.
The YU Yuphoria is a dual SIM (GSM) smartphone that accepts a Micro-SIM. Wi-Fi, GPS, Bluetooth, 3G and LTE Networks all are a lot of Connectivity options. The YU Yuphoria sensors include Compass, Proximity sensor, Accelerometer, Gyrometer. The device packs up the non-breakable Corning Gorilla Glass 3. So, it might save your Smartphone when accidentally fallen.
DISCLAIMER: This is an initial build that may not boot at all. You must first take a backup of your data before flashing your Android device. We are not responsible if your device gets damaged or brick. So try at your own risk.
Installing a custom ROM on a YU Yuphoria (Lettuce) requires to Unlock Bootloader on the YU Yuphoria (Lettuce) phone, which may VOID your warranty. However, it may delete all your data also. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone. Hence, we cannot be held responsible for the mistakes done by you.
Status for LOS 14.1 for Yu Yuphoria Custom ROM (Lettuce)
– Not Distinguished
Before getting started you must take care of the following task. Thus, it will help you flash your device without any interruption.
Step 1: Install USB drivers for your device on your PC.
Step 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.
Step 3: Make sure that your device must well charge. Ideally, the battery level should be around 60-80%. The more the better.
Step 4: USB Debugging should enable on your device.
Important: Most of the custom ROM will not have Google APPS in them. So, you will have to download and install GAPPS manually. Also, you must take the backup of nandroid before installing custom ROM. Done with preliminary precautionary steps?
Guide to install LOS 14.1 for Yu Yuphoria (Lettuce) ROM
TWRP Recovery allows you to do plenty of cool stuff. But the point of having any custom recovery is to be capable of flashing unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.
Let’s see how to flash a LineageOS ROM on YU Yuphoria (Lettuce) using TWRP recovery.
How to Install LOS 14.1 Yuphoria Custom ROM (Lettuce)?
i) Download and transfer the official LineageOS ROM and GAPPS for Lineage os you wish to flash to your device’s storage.
ii) Now boot your Android device into TWRP recovery.
iii) Select “Wipe” from the TWRP main menu and do a “Swipe to Factory Reset” on the bottom of the screen.
└ Note: This will factory resets your device. Simply Skip the step if your ROM does not need a factory reset.
iv) Now, go back to TWRP main menu, tap on “Install” and select the official Lineage os ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.
- After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of the screen to begin the custom ROM installation process. This may take some time.
- So, finally, when your ROM successfully flashed, you’ll see the “Wipe cache/dalvik” option. Thus, select it and then do “Swipe to wipe” on the bottom of the screen.
- Hit the “Back” button once the cache & Dalvik wipe completes. Also, hit the “Back” button on-screen and then select the “Reboot System” button.
Download Link- OFFICIAL LINEAGE OS 14.1 FOR YU Yuphoria (Lettuce)
Feedback from our Team & Users
So, many of you guys are waiting for the Official Lineage OS for Xiaomi Redmi 1S. As, we are looking for constantly searching for “Armani” (basically a codename for Xiaomi Redmi 1S. So, after hearing from the users the first official build is; however, as good as the MIUI 8.2 developer. The users also confirm that the MIUI 8.2 almost no lag or boot loops. As we are happy to tell you that now you can download and install MIUI 9 on your devices.
Feedback from our team is that some of us are not happy with the images clicked with there respective smartphone main cameras. Since users are quite happy with the performance of Lineage OS. Also, our team expects that LineageOS soon give an update of LineageOS 15.0 oreo for Xiaomi Redmi 1S.
So, what’s your decision of installing LineageOS ROM? Did you guys have used the LineageOS ROM if yes than do comment in the comment box for any Assistance? If you guys think that you have some more ROMS for Lenovo ZUK Z2 than do share with us. If you have some cool things to share with us, then let us know? Feedbacks of users is very much valuable before installing any ROM. So, these are Feedback from the team and hope you guys enjoyed and excited to install LineageOS ROM.